Can You Over Inflate An Air Mattress? Find How To Do It?

There is one thing you should note about the air mattress, you need to use and properly store it to get the best value out of your investment.

However, many questions come up regarding air mattresses, and one is, “can you over inflate an air mattress”?

Over inflating an air mattress

So, can you over inflate an air mattress? The simple answer to the question is yes, you can. However, it would be best if you did not embark on this journey.

We say so because overinflating the air mattress will make it hard and most likely rupture. This is because the excess air will move to its center if the air mattress gets over-inflated.

And, when you lay on it, this excess air gets to move to the sides and stress the seams of the mattress. In times like this, your seams will likely rip.

It must be understood that your air mattress needs to be blown to roughly ninety percent capacity. Therefore, we advise that you stick to ninety percent, especially when using the mattress for the first time.

One primary reason is that it becomes susceptible to rupturing when you overfill the air mattress.

Inflating the air mattress

Now that you have answers to whether you can over-inflate an air mattress, you should know the steps to inflate the air mattress. Air mattress are a good choice if you are setting one up in your truck bed.

Here is how you can find the best air mattress size for your truck bed.

The steps to follow are:

Step One: Opening its valve cover

Many air mattresses come with a one-direction air valve, while some come with a hole at the side.

When inflating the mattress, you must first locate the valve and remove its protective cap. If you do not do this, there is no way you can get air on the mattress inside.

Remember that the modern air mattresses you will find these days have inbuilt pumps at the side. If you have one of these, quickly flip it on the switch because as long as the pump gets powr4, it will begin its inflation work.

Step Two: Inserting the pump

Irrespective of whether you are using a manual or an electric pump, the second step is to put the pump’s nozzle in the valve opening or hole.

Note that the pump must use the material around the valve to make a tight seal. If it does not, air will escape around its pump, thus making it difficult to enlarge the mattress thoroughly.

However, if you cannot make a tight seal around your pump, you can place tape around the pump with duct tape. Or, embark on melting plastic around your pump, as it will make it thicker while simultaneously providing a tighter seal.

Step Three: Turning the pump on

For those using automatic pumps, ensure it is plugged in or has enough battery power before turning it on. When this is done, your mattress will begin inflating.

Remember that these pumps are loud, and it is ideal not to use them when people are sleeping.

And if you are using a manual pump, you must begin pumping. Two types of manual pumps can be used. They are:

Foot pumps

They are like foot pedals that you get to attach to a nozzle and hose. It would help if you stepped on this pedal repeatedly to force air into the mattress.

Hand pumps

They are large and typically work with an up-and-down motion. But, people use the smaller hand-that work with bicycle-style pimps occasionally.

Step Four: Screwing the latch on again

Now that your mattress is up to ninety percent capacity, you can remove the pump and screw the hole cap or valve back on it to trap the air.

It must be understood that one-way valve air mattresses automatically trap air within them. That’s all you need to do. So now you know “Can you over inflate an air mattress?” and how to not do it.

Frequently Asked Questions(FAQs)

Conclusion

Since people have asked whether can you over inflate an air mattress, we have provided you with the needed answers. Ensure you read through this article so you do not damage your mattress.

Here is how to clean an air mattress that you have bout recently.